MOUNTING INSTRUCTIONS
Important
Working responsibly with high frequencies
The AirLancer ON-D9a meets the requirements of the R&TT directives EN62479 and the FCC regula-
tions. To ensure compliance with these requirements, an adequate safety distance must be main-
tained between the antenna and the human body when operating the antenna.
Important
Electrical and electronic equipment law
In the interests of recycling, please do not dispose of electrical and electronic waste in your house-
hold garbage. Ensure that your electrical and electronic waste is disposed of in accordance with the
regulations in your country.
Important
Proper handling of antenna cables
Antenna cables are sensitive RF cables. During installation it is important that the cables are not
creased, and bent as little as possible, otherwise the antenna will suffer a loss in performance. Do
not coil the antenna cable in tight loops.
Important
Antenna gain and terminating unused antenna connectors on the access point
It is essential to terminate unused antenna connectors on the access point with the supplied rod
antenna. The terminating resistor supplied with the adapter AirLancer AN-RPSMA-NJ is suitable for
use with indoor access points. In addition, you must disable the unused antenna connectors in LCOS
(changing the antenna grouping of the respective WLAN module), and configure the antenna gain of
the antenna. The settings can be found in LANconfig at:
Configuration > Wireless LAN > General > Physical WLAN settings > Radio
