Lancom AirLancer MC-54, Manual

Page: 27 / 47

|
The AirLancer Client Manager
27
|
AirLancer
|
EN
e Complete the profile configuration with OK and activate the new profile
by clicking on the profile and then Activate .
f Check your country settings in the menu Action under Country Select .
Please notice that for a legal operation of your AirLancer radio card a cor-
rect country setting is mandatory, since the regulations for operating a
radio network may differ in different countries. Pay also attention to
chapter ’Radio channels’ on page 42 and the specific regulations for ope-
rating with radio networks in different countries!
g Now close the AirLancer Client Manager .
4.3 Overview of the functions
4.3.1 Administration of profiles
•
Installing profiles
•
Changing to another profile
4.3.2 Configuration
You can configure installed profiles in the AirLancer Client Manager under
Profile Management and activate them with the command Activate .
•
For ad-hoc networks you have to enter network name, radio channel and
WEP key.
Ad-hoc networks are only possible in the 2,4 GHz frequency band using
IEEE 802.11g and IEEE 802.11b. Ad-hoc networks are not available with
IEEE 802.11a in the 5 GHz band.
•
When using base stations you can scan (open) Wireless LANs within
reach. The available radio networks within reach are listed on the regi-
ster card
Profile Management under Available Networks . You can
easily select the desired one by cklicking on and activating it via Acti-
vate .
4.3.3 Analysis, diagnosis and information
The page Link Status of your AirLancer Client Manager lists information
about the status of the Wireless LAN and the your own radio LAN interface,