LANCOM Wireless DSL – LANCOM Wireless ADSL
Chapter 2: Installation
29
EN
2.3.2
The back of the unit
The connections and switches of the router are located on the back panel
(example: LANCOM 1811 Wireless DSL):
���
Connection for diversity antenna
���
Connection for the included power adapter
���
Switch with four 10/100Base-Tx connections
���
WAN port for LANCOM 1511 Wireless DSL and LANCOM 1811 Wireless
DSL respectively ADSL port for LANCOM 1521 Wireless ADSL and
LANCOM 1821 Wireless ADSL
���
ISDN/S
0
port
���
Serial configuration port
���
Reset switch
���
Connector for main antenna (use this connector to connect additional
AirLancer Extender
antennas)
The function of the reset button
The reset button has two different functions depending on how long it is
pressed:
Restarting the device
(soft reset) – push the button for less than five
seconds. The device will restart.
Resetting the configuration
(hard reset) – push the button for more
than five seconds. All the device’s LEDs will light up green and stay on. As
soon as the reset switch is released, the device will restart with factory set-
tings.
Reset
AC12V
LAN3
LAN4
LAN2
LAN1
ISDN S
0
WAN
10/100Mbit/s
Config(COM)
Antenna Main
Antenna Aux
���
쐋
���
쐄
쐏
쐂
��� 쐊
