LANCOM 1811n Wireless – LANCOM 1821n Wireless
Chapter 2: Installation
32
EN
The following can be displayed for WLAN link:
WLAN Data
Provides information about the data traffic at the internal WLAN module.
The following can be displayed for WLAN data:
VPN
Status of a VPN connection.
Off
No WLAN network defined or WLAN module deactiva-
ted. The WLAN module is not transmitting beacons.
Green
At least one WLAN network is defined and WLAN
module activated. The WLAN module is transmitting
beacons.
Green
Inverse flashing
Number of flashes = number of connected WLAN stati-
ons and P2P wireless connections, followed by a pause
(default).
Alternatively, the frequency of the flashed can indicate
the received signal strength of a P2P link or the received
signal strength from an access point, to which this
device is connected in client mode.
Green
Blinking
DFS scanning or other scan procedure.
Red
Blinking
Hardware error in the WLAN module
Green
Flickering
TX data traffic.
Red
Flickering
Error in wireless LAN (TX error, e.g. transmission error
due to a poor connection)
Red
Blinking
Hardware error in the WLAN module
Off
No VPN tunnel established
Green
blinking
connection establishment
Green
Flashing
First connection
Green
Inverse flashing
Other connections
Green
On (perma-
nently)
VPN tunnels are established
