Page 17
How to save measurement values
Every measurement can be stored on the
SD card in a CSV file by pressing the
“Save” soft key (here shown using a CU
measurement as an example).
Here, the value of the data point under
which the measured values are to be stored
and the associated info text can be chosen
freely.
The corresponding display is called up by
pressing the “Change” soft key.
Press the „
“ soft key to select whether
increases or decreases the value of the
data point.
the measurement point (MP) or info text
(text) should be modified. Press the “OK”
soft key to select the measured value
underlaid with the dark background that is
marked with a “>”.
Edit measurement point
Press the „
“ or „
“ soft key to
increase or decrease the value of the mea-
surement point.
Already existing measurement points will
not be overwritten.
Once the desired measuring point has been
edited, press the „
“ soft key to end
the input.
Assign infotext
Info texts must be created on a PC prior to the measurement, stored in a file
named INFOTEXT.TXT and transferred to the
PipeCheck
plus
via USB cable (see
page 25).
Press the „
“ or „
“ soft keys to select
the info text above or below.
Once the desired info text has been selec-
ted, press the „
“ soft key to end the
input.
