Introduction:
This User Guide is meant to guide the manager through Lancer’s TouchPoint touch screen software.
This guide will inform and educate the manager on all of the features and functions associated with the
TouchPoint unit software. If a complete Operations Manual is required, please refer to the Lancer web
site (lancercorp.com) or for your convenience, scan this QR code with a mobile device (app required)
for immediate access. Contact Lancer Customer Service if any assistance is required.
ADA Keypad
For users that cannot reach the touch screen, an ADA
keypad is located on the splash plate. The user can cycle
through the selections using the arrows and make their
selection using the select button.
Modes of Operation
The key switch gives access to: Disable Dispense Mode,
Run Mode, and Service Mode.
Selection Screen
“Valve OFF” Position
Touch Screen
Disabled
“Service” Position
Service Mode
Main Menu Screen
“Run” Position
Normal Operation
Mode
1. To operate insert the key provided into the key switch
located on left side of the unit.
2. Turn the key switch to the position labeled above.
DO NOT leave the key in the key switch while not in
use.
Brands that have been tagged sold-out cannot be
selected.
NOTE
NOTE
The selection screen give the consumer the option to:
1. Swipe right-to-left to rotate the cup carrousel clock-
wise.
2. Swipe left-to-right to rotate the cup carrousel counter
clockwise.
3. Touch any cup in the carrousel to make it selectable.
4. Touch the selected cup to dispense.
5. Touch water icons to dispense Plain or Carbonated
water.
B
B
A
A
D
B
C
A. Select - Performs the highlighted task
B. Navigation Arrows - Scrolls left and right
A. Cup Carrousel - Displays available beverages
B. Sold-Out Cup - Beverage tagged sold-out
C. Water Selection - Plain/Carb water dispense
D. Selected Cup - Beverage to be dispensed
2
