BEV85 Quarterly Service
Work Instruction
www.lancerbeverage.com
Page 2 of 3
Images are for illustration purposes only as product may vary.
No 075
– 1 November 2018
Remove Regulator Filter
Bowl
Turn Clockwise and pull down
to remove.
Clean with warm soapy water.
Remove Regulator Brass
Filter
Turn the Brass Cartridge
Clockwise to loosen and
remove.
Clean with warm soapy water.
Clean by placing in sanitiser
alcohol to soak and shake.
Refit by turning anti-clockwise
once cleaned or replaced.
Replace Regulator Filter
Bowl
Push up and turn anti-
clockwise to replace bowl.
6
Access Air filters (2 of)
Twist anti-clockwise and pull
on the filter casing cap to
expose the filter element
inside.
Inspect & Clean air filter
Clean filter by Tapping or dust
off from back direction.
Inspect behind filter, if housing
is dirty or oily wipe clean.
Replace filters every quarter
where installed outdoors, in
damp, dusty or oily
environments.
Replace air filter & Cap
Replace air filter.
Locate filter cap onto the
housing and twist clockwise to
replace and lock into place.
7
Inspect the Non-Return
Valve Seal
With the use of a Spanner
turn the nut anti-clockwise to
loosen.
Remove and expose the
spring & seal.
Note orientation of parts as
removing them.
Inspect & wipe Clean face of
seal & NRV body.
Replace Seal & Spring, and
nut. Tighten using only
fingers, in a Clockwise
direction.
8
Re-connect and energise
the electrical supply to the
air compressor
Plug electrical lead into socket
outlet and lift red button on
pressure switch to turn on the
air compressor.
