PAGE 13
Service Call Reminder:
An illuminated FLASHING YELLOW display and
scrolling message to call contact name for scheduled service. To clear the
Service Call Reminder, press
and
buttons simultaneously while
the number banner text screen is displayed.
Error Message:
If the valve is not able to function properly, the display
will illuminate FLASHING RED, the word “ERROR” and an error code
number will display. If a contact name and phone number were input, this
information will alternate with the ERROR display, Contact the name on
the display, the professional contractor or our factory for help.
Current time of day needs to be entered during initial installation, and adjusted when daylight saving time begins or ends.
If an extended power outage occurs and depletes the on-board non-rechargeable coin cell battery, when power resumes
the time of day should be reset and battery replaced.
STEP 1
STEP 2
STEP 3
STEP 1
– Press
CLOCK
STEP 2
- Current Time (hour): Set the hour of the day using
or
buttons. AM/PM toggles
after 12. Press
NEXT
to go to Step 3.
STEP 3
- Current Time (minutes): Set the minutes of the day using
or
buttons. Press
NEXT to exit Set Time of Day. Press
REGEN
to return to previous step.
RETURN TO NORMAL MODE
SET TIME OF DAY
Low Battery:
A non-rechargeable 3 volt lithium coin cell battery type 2032 is located on the circuit board ( see diagram
on page 19, used only to maintain the time of day during power outages (all other information will be stored in memory
no matter how long the power outage). The screen displays LOW BATTERY when the battery needs to be replaced.
The screen will remain illuminated SOLID BLUE when LOW BATTERY is displayed. Initially LOW BATTERY display
will alternate with the User display, finally displaying only LOW BATTERY. User displays are still accessible by pressing
NEXT
.
To replace with new battery, unplug the control valve transformer from the 120 volt receptacle first. Install new battery and
then plug transformer back into the receptacle to restore power.
It is important to replace the battery with the control
valve unplugged to prevent the possibility of causing a short and damaging the PC Board.
Summary of Contents for 7-LXDAN-1B
Page 38: ...PAGE 38...
Page 39: ...PAGE 39...
