Quick Installation Guide
Rack type PoE+ switches
PL
| EN
E-mail: [email protected]
www.lanberg.eu
Lanberg © 2015-2021
9
|
14
1)
Important pre
-
recommendations and information regarding rack
type PoE
switch usage
1.1)
Introduction
PLEASE KEEP THIS MANUAL
–
set of recommendations and user manuals for Lanberg
rack
type PoE
switches, detailing the models supported below
:
•
RSFE
-16P-
2C
-150
•
RSFE
-16P-
2C
-250
contains logistics and technical data, instructions,
and regulations that must be adapted and followed
during transport, assembly, use and maintenance of above
-
mentioned products. Do not use the device
before carefully reading and adhering to all the information and safety precautions contained in the user’s
manual. Keep this manual for later use. All photos, drawings
included
in the manual are for reference only.
NOTE
:
For the most up
-to-
date version of this manual, please visit our website
at www.lanberg.eu.
1.2)
Contents of the package
•
Rack
type
PoE
switch,
•
Mounting
ears
for installation
in 19”
,
•
Power cord.
NOTE
: The contents of the packaging, its individual elements and rack type switches may vary depending
on the particular model.
1.3)
General safety precautions
•
The device specifications must be strictly observed when turning the product ON, using it and
connecting the equipment to any external products,
•
The device must not be used to work outside the rated values
given in specification.
The warranty does not cover any damage caused by a deviation from these values when using the
device,
•
Main’s
outlet (AC) should be easily accessible and located near the equipment. Remember to connect
the device only to a grounded socket,
•
NEVER
allow a situation where sparks or flames could occur near the device. The aftermath of such
case
could have very negative consequences for people and things in the vicinity,
•
If smoke comes out of the device, disconnect the AC power supply as soon as possible,
•
In the event of a fire, immediately and (without unnecessary delay) disconnect the power supply and
notify the fire department of the situation by dialing their assigned emergency number, in the country
of your stay,
•
The use of the device does not require specialized training or electrical qualifications. It has a similar
function to the PoE switches,
i
ndicating
of its intended use to power compatible terminal equipment.
The device can be used for IP, CCTV surveillance, access points in hotels, warehouses, companies, etc.,
•
The product is intended for indoor use. Do not rebuild and
/
or modify the products and
/ or its
components,
•
The manufacturer and distributor are not responsible for any damages resulting from improper use
and improper handling of the product (not in accordance with this manual).
