INTRODUCTION
KS-3108 FRONT VIEW
1 2
3 4 5
KS-3116 FRONT VIEW
1 2
3 4 5
1.
REMOTE LED
The REMOTE LED indicates whether the selected computer is controlled by remote console or local
console. If it is on, the computer is controlled by remote console. Otherwise, it is controlled by local
console.
2. The port LEDs are built into the Port Selection Switches. The upper ones are the On Line LEDs; the lower
ones are the Selected Port LEDs:
The On Line LEDs light RED to indicate that the computer attached to the corresponding port is up and
running.
The Selected LEDs light GREEN to indicate that the computer that attached to the corresponding port is
the one that has the KVM focus.
3. Reset
When the switch has no responding, use needle or ballpoint pen to plug into the hole to reset the switch.
4. Local / Remote switch button
Press the button to select whether local or remote console to control the computers.
5. Port Selection Switches
Press a switch button to access the computer attached to its corresponding port.