Lanaform TENSIOS1, Manual

Page: 31 / 134

EN
• 31 •
APPLIED STANDARDS
This product conforms to the previsions of the EC directive MDD (93/42/EEC).
The following standards apply to design and/or manufacture of the products:
- EN 1060-1
Non-invasive sphygmomanometers – Part 1 : General requirements
- EN 1060-3
Non-invasive sphygmomanometers – Part 3 : Supplementary requirements for
electro-mechanical blood pressure measuring system
- ANSI/AAMI SP10
Electronic or automated sphygmomanometers
- IEC/EN 60601-1
Medical electrical equipment – Part 1 : General requirement for safety
- IEC/EN 60601-1-2
Medical electrical equipment – Part 2 : Collateral standard: Electromagnetic
compatibility – Requirements and tests
TROUBLESHOOTING
Condition Cause Corrective Action
No display after push the
Start / Stop button
The positions of the
batteries are incorrect.
Insert the batteries in the
correct positions.
The voltage of the batteries
is extremely low.
Replace all four batteries
with new ones.
Replace batteries symbol The voltage of the batteries
is extremely low.
Replace all four batteries
with new ones.
When chilly, the batteries
might have a weak electron
release.
Warm up the batteries, or
place at a warm place for a
while then re-start again
Utilization times become
less
Might not utilize the Alkaline
batteries.
Try to utilize the Alkaline
batteries.
No reading after
measurement
The voltage of the batteries
is extremely low.
Replace all four batteries
with new ones.