Lanaform Stim+, Manual

Page: 7 / 48

EN
Stim +
7
DIAGRAM OF ELECTRODE POSITIONS
First charge the Stim+.
Warning: Do not forget to remove the protective films from the electrodes prior to the first use.
When using the
Stim+
and when positioning the electrodes, you are recommended to use two
electrodes per group of muscles. Electrodes represent positive and negative poles.
We do not recommend placing the two electrodes on either side of your body part. For optimum
and safe use, we recommend that you position and connect the electrodes as shown on the
diagrams enclosed.
Warning: never apply the electrodes to the head or opposite each other: i.e. do not place the
two electrodes on either side of your body part.
GENERAL USE
1. Place the electrodes: Apply the electrodes on the body
parts you intend to build up as shown on the diagram.
2. Turn the
Stim+
ON: Turn the intensity knob (knob 2)
clockwise from the OFF position. The appliance will start
to operate at this point.
3. Select your mode: once you have switched on your
Stim+
, you should select a mode from among
the 4 programmes available (warm-up, beginner,
intermediate, advanced). Each programme corresponds
to the level of the user.
Turn the knob clockwise to select a mode (1 to 4).
4. Set intensity:
Then select the intensity by turning the “Intensity” button clockwise; the intensity increases
progressively from 1 to 5.
Turn the intensity knob anti-clockwise; the current will gradually decrease.