Lanaform MAGIC SET, Manual

Page: 4 / 56

EN
• If you suffer from allergic reactions, consult a doctor before using this product.
• Do not use “MAGIC SET” on irritated, sunburnt or chapped skin or on skin suffering from a dermatological condition.
• Do not use the appliance on skin suffering from rashes, warts, beauty spots or varicose veins.
• Use of the “MAGIC SET” must be comfortable and pain-free. If you feel any irritation of the nails or of the skin, or if you
feel any pain in your hand while using the appliance, stop using it temporarily. If you have a more serious reaction,
consult your doctor.
• Use this appliance exclusively for the purpose for which it was designed, as described in this manual.
N.B.:
Repair of the “MAGIC SET” must be carried out by authorised LANAFORM® staff, otherwise the warranty will be
cancelled.
Features of the «MAGIC SET»
Adaptor specifications:
Input 230V – 50 Hz
Output 2.8 V DC 500 Ma
MAIN ELEMENTS
1. Disks for remodelling and filing nails
2. Conical polishing tool
3. Thin manicure stick
4. Wide manicure stick
5. Fine file
6. Coarse file
7. Brush
8. Appliance housing
9. Plastic carrying case
10. Nail-drying appliance
11. ON/OFF selector switch for nail-drying appliance
CHARGING THE APPLIANCE
1. If using the appliance in cordless mode, it must be charged for at least 24 hours before the first use to ensure that the
batteries are fully charged.
2. Charging time is normally 6 hours.
3. Ensure that the selector switch is set to “O” (OFF) before recharging. Connect the appliance to the recharging unit
and connect the adapter to the power socket. The indicator will light up. Before using the appliance, disconnect the
recharging unit from the power source.
USING THE APPLIANCE WITH THE ADAPTER
1. The appliance can also operate directly from the mains using the adapter supplied, if the batteries are empty. Use only
the adapter supplied.
2. Connect the adapter to the appliance and connect the adapter to the power socket.
3. If using the adapter when the batteries are empty, the appliance will take 30 seconds to operate at full output again.
4