Lanaform Lumino Plus, Instructions For Use Manual

Page: 6 / 80

EN
INSTRUCTIONS FOR USE
It is recommended to use LUMINO PLUS preferably between 6 am and 8 pm.
1. Insert the base of the LUMINO PLUS into the main part as shown in the drawing
(Fig. 3) . Make sure that the lamp is
properly connected to its base before placing it on a solid surface.
2. Place your LUMINO PLUS on a solid surface, such as a table, and adjust the orientation of the LUMINO PLUS. It can be
tilted to 35°.
(Fig. 4)
3. Connect the power lead to the mains.
USE:
• You can choose from among two type of light intensity:
- Position I: 2 36W PLL tubes for an intensity of about 7,200 Lux at a distance of 20cm.
- Position II: 3 36W PLL tubes for an intensity of about 12,000 Lux at a distance of 20 cm.
• The recommended exposure time to LUMINO PLUS depends on the distance in relation to the lamp as well as the light
intensity selected. However, it is generally recommended to use the appliance for 2 hours at a light intensity of 2,500
Lux. According to the table below, you can easily calculate the recommended exposure time:
Distance Position 1
(2 tubes)
Recommended
duration
Position 2
(3 tubes)
Recommended
duration
16 cm 8500 35 min 14500 20 min
22 cm 6800 45 min 10500 30 min
28 cm 5000 1h 7500 40 min
36 cm 3500 1h25 5000 1h
45 cm 2500 2h 3900 1h15
• Position yourself in front of the appliance and adjust the angle of the LUMINO PLUS.
- The distance between your face and the screen should be from 15 to 50cm. Adapt the latter according to your
preferences and comfort for your eyes.
- You do not have to sit directly in front of the appliance.
- You can space out the duration of your light therapy session.
• Do not look at the lamp directly. During the session, you can read, write, telephone, etc.
• Exposure must be regular and during a prolonged period. During the darkest days of the year, repeat the treatment for
at least 7 consecutive days, according to individual requirements.
• After use, stop the machine by turning the button located on the front of the appliance to position «0» and disconnect
it.
• If during the session of exposure to light you feel eye pain or other discomfort, immediately stop using LUMINO PLUS
and consult your doctor.
MAINTENANCE AND STORAGE
Cleaning:
• Disconnect the appliance and allow it to cool down.
• Use a cloth or wet sponge to clean the outside surface of the lamp.
• Do not use scouring pads, abrasive products or aggressive detergents such as acetone or petrol to clean the appliance.
6