6
· E
N
G
LI
SH
EN
will be fully charged when the LED charge in-
dicator is green.
Recommendations for
power supply via USB
When connecting a device via a computer's
USB port, make sure that the computer can
provide the required electrical power. Always
use USB 3.0 or higher ports, and connect lap-
tops to the mains supply. Otherwise, the de-
vice may not work or may operate with re-
duced performance.
Instructions
Use
01
When using for the first time, or if
the mirror has not been used for a
long period of time, please charge
the battery fully before use.
02
Press the touch button on the front of
the mirror to turn on the LED light.
03
With the light on, briefly press the touch
button to change the colour of the light
or to turn off the light. Order: Cool white
> Warm white > Natural white > OFF
04
Press and hold the button to adjust
the intensity. The mirror remembers
the intensity previously used and
maintains the same brightness
when switched on again.
Charging
Connect the USB-C cable included to the back
of the product to begin charging.
• The charging button is red:
the device is charging.
• The charging button is green:
charging is finished.
• When the battery is low, the mir-
ror's LED light becomes less in-
tense. Please charge the product.
Cleaning
Maintenance
• Switch off the light using the
ON/OFF touch button.
• Clean the sides of the mirror with a
glass cleaner and a soft, damp cloth.
• Do not immerse the mirror in water.
• Never use other liquids or
abrasive cleaners.
Storage
Store the device in a cool, dry place out of the
reach of children, after cleaning and drying.
E-IM-BambooMirror_A5_v1.0.indd 6
E-IM-BambooMirror_A5_v1.0.indd 6
04-10-22 16:07:54
04-10-22 16:07:54
