7
· E
N
G
LI
SH
EN
Note
The Wi-Fi symbol flashes quickly ( ). If not,
“reset” the device by pressing the “atmos-
pheric light” button for several seconds.
• Make sure your smartphone is con-
nected to a Wi-Fi network.
• Download the free Lanaform Con-
nect app from the App Store (iOS)
or from Google Play (Android™).
• Launch the Lanaform Connect app
and follow the instructions.
• Click Connect a New Device or press the
+ button at the top of the screen. Fol-
low the on-screen instructions to con-
nect the air humidifier to your network.
Note
Depending on the smartphone settings, in-
ternet connection or data transmission may
result in additional costs.
This instruction is only valid when the air hu-
midifier is set up for the first time.
Description
The device 1
01
Diffuser sprinkler tip
02
Water reservoir cover
03
Carrying handle
04
Atmospheric light
05
Vapour chimney
06
Water reservoir
07
Antibacterial filter
08
Water reservoir cap
09
Control panel and display screen
10
Base of the device
11
Cleaning brush
12
Ultrasonic disk
13
Vapour chimney nozzle
Display panel 2
01
On/Off button
02
Atmospheric light button
03
Humidity level/timer display
04
Timer button
05
Night mode button
06
Humidity level button
07
Emission intensity button
Preparation
before use
01
Place the humidifier in the room half
an hour before turning it on so that it
can adjust to the room temperature.
02
Ensure that it is always placed on a
hard, flat and horizontal surface. Keep
it away from walls and heat sources
such as stoves, radiators, etc.
03
Make sure the device is clean
before starting to use it.
04
Filter placement 3
The humidifier has an antibacterial filter.
To place it, first remove the reservoir
cover and the vapour emission chimney
by turning it counterclockwise. Then
firmly insert the filter cartridge into
its notch. Then replace the vapour
emission chimney on the reservoir
by turning the chimney clockwise.
05
To fill the water reservoir:
· Make sure the humidifi-
er is disconnected.
· Remove the water reservoir cover and
fill the reservoir with clean, fresh, dis-
tilled or demineralised water or
· Remove the water reservoir and its cov-
er from the base and fill it with wa-
ter before replacing it on the base,
ensuring that the markings on the
base and reservoir correspond.
Note: When filling, ensure that the water does
not go into the vapour chimney to ensure that
the water is injected directly from the reservoir
into the base of the device.
E-IM-H200C-Lot001-v1.1.indd 7
E-IM-H200C-Lot001-v1.1.indd 7
06/10/2022 15:45:24
06/10/2022 15:45:24