• The LED charging indicator will come on to show proper charging.
• Before the first use, recharge the unit for 15 hours to ensure the battery is fully
activated and fully recharged.
• For next charge, 7 hours are enough for full recharge.
• For each full recharge, the operation time is about 30 minutes.
• At this point, the manicure/pedicure is ready for use.
• To preserve the battery, discharge the battery completely every 3 months and then
recharge it for 15 hours.
How to connect the unit directly
• The unit can be connected directly when the battery is empty, so you do not need
to wait for recharging to continue to use the appliance
• Connect the “Direct-drive Cord Connector” to the jack at the back of the unit and
to the “Jack for Direct-drive”.
• Now, you can use the unit in direct-drive mode.
• If you feel the unit is not powerful enough, this is because the rechargeable
battery is not sufficiently charged.
• In this case, you need to recharge the unit for 5 minutes before you proceed to
direct-drive.
How to use the attachments
All of the attachments are made of sapphire. They will not harm your nails or skin.
Choose the desired attachment and push it into the head of the unit. To remove, just
pull it out firmly from the manicure set.
Start the treatment by choosing the suitable speed. This unit has two speeds.
For better performance and results, do not wash your hands before treatment.
Wash after treatment and massage with lotion to care and soothe your skin.
This manicure/pedicure set comes with 7 interchangeable attachments: all of them
are made of sapphire.
1) Thin Sapphire point
Use to effectively remove dead skin and to treat ingrown nails by moving the point
from the outside towards inside of the nails.
2) Thick Sapphire Point
Use to file and treat the surface of thick toenails.
3) Ball Sapphire Point
Use to file and treat the surface of both thick toenails and finger nails.
4) Fine Grain Cone
Gently treat the area to eliminate rough skin corns.
1012_NOTICE 17/11/04 12:33 Page 15
