Lanaform Davy Mist, Manual, Page: 14 / 112

14
· E
N
G
LI
SH
EN
01 using fresh, distilled or deminer-
alised water for each use.
02 cleaning the reservoir every 3 days and
cleaning the transducer every week.
03 emptying and cleaning the device (see explanations
below), as well as making sure that all its parts
are completely dry when it is not in use.
To clean the transducer
insert_photo
5:
01 place 2 to 5 drops of vinegar on its sur-
face and allow to stand for 2 to 5 minutes.
02 brush the foam off the surface with a
soft brush or cotton swab. Do not use
a hard tool to scrape the surface.
03 Do not use soap, solvent or spray
cleaner to clean the transducer.
To clean the reservoir and reservoir cover:
01 Use a soft cloth and vinegar if there are any
foam or limescale deposits on the inside.
02 Rinse with clean water.
report_problem
Never use products containing bleach to clean the
device, but only dishwashing detergent or vinegar!
report_problem
Never immerse the base (Fig. 1, point 9) in water!
Storage
Store the device in a dry, cool place out of reach of chil-
dren after cleaning and drying.