17
Body Hair Clipper
Charging the clipper-razor
1)
Plug the DC plug from the charger into the DC socket situated at the extremity of the charging base.
2)
Connect the charger to the mains power supply.
3)
Switch off the unit and place it in its charging support cradle.
4)
The red indicator light will glow; it indicates that the unit is being charged.
5)
Before using the unit for the very fi rst time, it must be charged for at least 24 hours.
6)
After several uses, when the battery is weak, recharge it for a period of at least 7 hours.
7)
To conserve battery capacity, you should discharge the battery completely every three months and then
recharge it completely.
8)
If the charging light does not come on, check that the plug is making good contact with the socket on the base
Cleaning and storage
1)
After use, switch off the unit and disconnect it, remove the cutting head while holding the front edge.
Rinse the blades under the tap, or clean them using the cleaning brush provided (see fi gure A).
2)
Always use fresh water only to clean the Body Hair Clipper, without any additional cleaning products.
3)
Dry the unit using a dry cloth.
4)
Always store the unit in a dry place out of the reach of children.
5)
Do not submerge the Body Hair Clipper in order to clean it.
Summary of Contents for Body Hair Clipper
