Lanaform Aroma Design Instruction Manual Download Page 3

Page: 3 / 12

INSTRUCTION MANUAL

Thank you for buying the Aroma Design from LANAFORM. The essential oil diffuser Aroma Design combines technology,

wellbeing and design. Very silent, it allows at the same time the propagation of an aromatized cold vapour but also the

diffusion of soft coloured lights variations in your house.

PLEASE READ ALL THE INSTRUCTION PRIOR TO USING YOUR DIFFUSER, IN PARTICULAR THESE FEW
BASIC SAFETY INSTRUCTIONS:

• Always place the Aroma Design on a hard, flat, horizontal surface. Keep slightly away from walls and heat sources such

as cookers, radiators, etc. Caution: If not placed on a horizontal surface, the Aroma Design may not work correctly.

• Check that your mains voltage is compatible with that of the appliance.
• Do not connect or disconnect the plug with wet hands.
• If the supply lead is damaged, it must be replaced by a similar lead available from the supplier or its after-sales

department.

• Do not leave the diffuser in the sun for long periods of time.
• Do not completely dismantle the device.
• Do not switch the diffuser on when there is no water in the tank.
• Do not touch the transducer when the device is switched on.
• Do not use essential oils which are not recommended.
• Do not use artificial perfume, these may damage the device.
• Ensure the cable does not pass directly above the transducer.
• Do not tug at the water detector, this could damage the device.
• Unplug the device prior to cleaning.
• Do not wash the complete product in water and do not immerse it, see cleaning instructions in this manual.
• Never scrape the transducer with a hard object, see cleaning instructions in this manual.
• It is advisable to use the Aroma Design for periods of 30 minutes, several times a day if you wish.
• This device was not designed for use by people with reduced physical, sensory or mental capabilities (including

children), or people without experience or knowledge of the product, unless it may be beneficial to them and the person

responsible for their safety can supervise them and has received advice and instruction in using the device. Children

should be supervised to ensure that they do not play with the appliance.

COMPONENTS

1. Plastic lid for adjusting the steam output (1)

2. Water sensor and LED light generator (2)

3. Plastic base (3)

4. Holder for the water sensor and LED light generator (4)

5. Diffuser (5)

6.Transformer (6)