Lamusa Europa-2110, Starting Manual

Page: 27 / 42

27
6- MAINTENANCE
6.2- TYRES PRESSURE
Indicated pressures are provided by the manufacturer, at maximum load.
In general use and especially when working on irregularly tilled terrains, it is recommended to use a
slightly lower pressure to absorb the ground’s irregularities and get a higher regularity in sowing.
6.3- SCREWS
After working for some hours, all screws should be checked and tightened. Put special attention to the
ones which fix the tines to the coulter. For these ones, a special socket wrench is supplied which it is
placed inside the hopper.
6.4- ANTIOXIDE CONTROL
Once the sowing season is finished, antioxide maintenance must be carried out as follows.
a) Dismantle the pipes, nozzles and shutoff gates. Clean them thoroughly.
b) Wash with water jet the whole machine, specially inside the hopper and the dispensers (with
the covers removed). Turn the right wheel so that the seed wheels can be completely washed.
c) Give a coat of paint to those parts with oxidation signs, specially those made of metal sheet.
d) Verify the general greasing.
Tyres Pressure
10/75-15,3 6 kg/cm
2