17
4
Mounting and Electrical Connection
4.4.2
Connection to ETAMATIC
Fig. 4-6 Electrical connection between ETAMATIC/ETAMATIC OEM
NOTICE
For a direct connection between the data module and GKI300, a cross-over Ethernet cable
type 663R0105 is used.
Alternatively, a connection through an intermediately switched hub or switch is possible.
In this case, commercial, non-crossed-over Ethernet cable must be used.
Connection diagram of the ETAMATIC/ETAMATIC OEM with terminal designation
1
Connection between ETAMATIC and the data module
2
Data module
3
GKI300
4
Ethernet line (cross-over)
5
ETAMATIC/ETAMATIC OEM
