Lamtec F300K IR-2, Manual

Page: 7 / 126

6
1 Important Information about the Manual
1.3 Target Group
These instructions must have been read carefully and completely before commencing with
any work. The basic prerequisite for working safely is compliance with all the specified safety
instructions.
NOTICE

All assembly, commissioning, troubleshooting and maintenance work may only be carried
out by authorised and trained personnel.

The device may be operated and maintained only by those who are capable of doing so
in terms of their level of knowledge and training.

For F200K, the covers must be removed for commissioning, but then only by authorised
personnel. Any further opening or disassembly is not permitted.
The open flame scanner must be protected from ingress of dust and moisture.
Contact with the electronics is only permitted if ESD measures are observed.

Opening the devices is not permitted under any circumstances except for commissioning
(F200K).

For safety reasons, access to parameterisation must be restricted to authorised
personnel.
1.4 Safekeeping of the Manual
Look after the manual and all the associated documents carefully.
The manual is part of the product and must be kept safe and be accessible to personnel at all
times.
Moreover, it is important that the manual:
• Is available when required.
• Is kept for the entire service life of the device.
• Is available to its next operator.