LAMPTAN Zigbee Minihub, User Manual

Page: 20 / 24

Note :
a) Make sure finish the Zigbee Minihub setup process first then start Smart
door & window sensor setup refer to above instruction.
b) Smart door & window sensor works best if the installation distance is less 1cm .
c) When Smart door & window sensor is fixed on the metal door & window frame,
make sure put a non-metal object between the sensor and the frame to avoid
the signal is shielded.
d) Please mount the Smart door & window sensor on a doorframe, window frame,
or the fixed part of a cabinet or drawer.
SmartDoor/Window sensor will disconnect the Internet once press and hold
the reset button until the green light is OFF .
How to disconnect the Door/Window sensor.
Operation Guide
Step 1
Step 2
Step 3
Step 4
Step 5
: Power on by inserting battery to the transmitter.
: Stick the magnet and transmitter on the install position
with a double-sided adhesive tape, and the clearance
between the two parts shall be no less than 1cm.
: Hold down the "Reset" button untill the green light is OFF,
then release the button. This indicates that the sensor is
off from the network. Short-press the Rest button to make
the green light slowly blink, which indicates that the sensor
is ready for network connecting.
: Login LAMPTAN Home app, add Smart door & window sensor
in to device list.
: Follow the LAMPTAN Home app instruction to complete the setup.
7