Lampoassa ESI 6-17, User Manual

Page: 34 / 62

34
TECHNICAL SPECIFICATIONS
100% GEOTHERMAL HEAT
HEAT COLLECTION CIRCUIT(S): Esi 6 Esi 9 Esi 11
Esi 11
1x230V
Esi 14
Esi 14
1x230V
Esi 17 Emi 22(22P) Emi 28 (28P) Emi 43 (43P) ELi 60 (60P) ELi 90 (90P)
Energy class of brine pump A (inverter) A (inverter) A (inverter) A (inverter) A (inverter) A (inverter) A (inverter) A (inverter) A (inverter) A (inverter) A (inverter) A (inverter)
Input power of brine pump W 5-89 5-89 10-170 10-170 10-170 10-170 10-170 160-1330 160-1330 160-1330 30-2100
Factory setting of brine pump % 90 90 90 90 90 90 90 90 90 90 90 100
Ground loop maximum
length, 1 ground loop (6
Borehole,
PEH, PN6
m 500 350 450 500 - - - - - - - -
Horizontal pipe,
PEM, PN10
m 450 300 - 380 - - - - - - - -
Ground loop maximum
length, 2 ground loops
(6
Borehole,
PEH, PN6
m - 900 1200 1600 900 1000 600 1050 - - - -
Horizontal pipe,
PEM, PN10
m - 750 1050 1250 650 800 500 900 - - - -
Ground loop maximum
length, 3 ground loop
(6
Borehole,
PEH, PN6
m - - - - - - - - 700 - 500 -
Horizontal pipe,
PEM, PN10
m - - - - - - - - 550 - 400 -
Ground loop maximum
length, 4 ground loop
(6
Borehole,
PEH, PN6
m - - - - - - - - - 750 900 -
Horizontal pipe,
PEM, PN10
m - - - - - - - - - 600 700 -
Nominal flow
∆T=3K (ISO
14511)
l/s 0,64 0,79 0,94 0,91 1,18 1,11 1,34 1,65 2,19 3,41 - 700
Maximum external
pressure drop
kPa 53 48 81 82 65 71 54 203 89*** 127 - 550
Nominal flow
∆T=4K
l/s 0,48 0,59 0,70 0,68 0,89 0,83 1,00 1,24 1,64 2,56 - 900
Maximum external
pressure drop
kPa 66 65 96 100 84 91 77 208 100*** 152 - 750
HEAT DISTRIBUTION CIRCUIT:
Energy class of HC pump
A (inverter) A (inverter) A (inverter) A (inverter) A (inverter) A (inverter) A (inverter)
Accessory
Input power of HC pump W 5-53 5-53 5-53 5-53 5-53 5-53 5-53
Nominal flow
∆T=5K Floor
heating
l/s 0,40 0,50 0,59 0,58 0,74 0,71 0,70**
Maximum external
pressure drop
kPa 51 42 29 30 15 18 19**
Nominal flow
∆T=10K Ra -
diator heating
l/s 0,18 0,23 0,27 0,27 0,34 0,33 0,40
Maximum external
pressure drop
kPa 71 69 66 66 57 60 51
*Meets the energy efficiency class A+++ requirements. Meets the domestic hot water energy efficiency class A+ requirements.
**Calculated according to nominal flow at ∆T=7K.
***Maximum external pressure drop is possible to raise 191 kPa ∆T3, (204 ∆T4) when using 35 A fuses. Contact to your local dealer.
1) Tested according to ISO 3744/2010 at standard point B0/W55.
2) Tested according to ISO 14511/2013.
3) Tested according to EU 811/2013 at colder climate conditions.
4) Package means the combination of heat pump and heating regulator (EU 811/2013).
5) If conditions are requiring long cable work it is recommended to use 5x6 mm2 cable.
6) Calculated length according to nominal flow at ∆T=4K. Actual pressure drop is determined case by case.
8. ENERGY LABEL
9. HVAC SCHEMES
10. ELECTRICITY SCHEMES