WWW.LAMPOLIGHTING.COM
made in P.R.C.
SENSCRP15A
FUNCTIONS
Cod.
Input
Current
nominal
Power load
Ambient Light
IP
SENSCRP15A
AC220-240VAC 50\60Hz
15A
3300W MAX
<10 - 50 LUX
65
SAFETY
•
Installation and maintenance must only be carried out by qualified personnel
•
Always switch off the voltage before installing or servicing
•
Place the product in a suitable place for protection class IP65
•
Do not disassemble or tamper the product to avoid electrical shocks
•
Do not install on an unstable surface
IMPORTED BY: LAMPO LIGHTING TECHNOLOGY SRL
Via dell’industria 6, 47832 San Clemente RN ( ITALY )
www.lampolighting.com
The SENSCRP15A model is a light sensor switch with light sensitivity adjustable from 10 to 50 LUX
Suitable for external mounting
1.
Switch off main power
2.
Don’t install the photocell under a direct light (see fig.1) or where natural light is obstructed
3. Unscrew the 3 screws on the bottom cover, pass the cables through the two cable glands
predisposed (see fig.2)
4.
Connect wires to clamps as fig.3, adjust light sensor as required
5. Close the cover and tighten the 3 screws
6.
Drill the holes in the designated place and fix the bracket
7. Insert the sensor into the bracket
8. Switch on main power and test the sensor
• Light sensitivity adjustment (LUX),
from a minimum of 10 LUX till a maximum of 50 LUX
fig3
LOAD
fig.2
bracket
fig.1
wrong
correct
OPERATION INSTRUCTION AND INSTALLATION
ENG
INSTALLATION
This instruction sheet have to be kept for future consultations
