manualshive.com logo in svg

Lampo DMX dedicated LED controller, User Manual, Page: 4 / 4

Share
Download
Lampo DMX dedicated LED controller User Manual Download Page 4

The letters in zone 1 correspond to the led’s colours: 
- R (Red leds) 
- G (Green leds) 
- B (Blue leds) 
- A (Amber leds when used) 
- STROB (frequency of the flashed of strobe effect) 
 
The parameter in zone 2 is between 0 and 255 for each letter in zone 1 
LED:  0 all led is off, 255 led on at the maximum power 
Strobe:  0 the strobe effect is off, 255 the frequency rises to the maximum speed. 
 
The symbols in zone 4 correspond to the function of the buttons A, B, D, E (Fig. 2). 
Pressing the C button you can select the sections of the display. 
The selected section will be light in hold characters, once selected the parameter, use button 
A and B to change the value. 
 
Zone 3: shows which group of projectors is used, see under the LIGHT N sign, you can 
choose to control group 1 (select the value from 1 to 6) or to control all groups (select ALL). 
To see how to assign a projector to one group see pag.2. 
 
Pressing the 

D

 button (AUTO) you enter the 

automatic mode. 

Pressing the 

E

 button (PROG) you enter the 

programming mode

.

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 
 
 
 
 
 

4 

Automatic mode 

 

The projectors connected to the led controller will execute the set program. 

 
 
 

 

 

                

 

          

 

 

 

 
 

Fig. 3 

 
 
 

 
To choose a program press button 

A

, in Zone 2 under “PROG:” is shown which of the 4 

available programs is used. 
In Zone 1 is shown the step and the time of execution. 
The button 

B

 shows the performing mode used, single scene or continuous mode. The mode 

used is shown on the display above button 

B

. 

  
 

 

Icona che rappresenta la modalità ripetuta. 

 
 

 

Icona che rappresenta la modalità singola. 

 
Continuous mode means that once the program is correctly set it repeats it self continuously 
from beginning till the end. 
 
Single scene mode means that once the program is finished, the projector will remain on the 
last step of the scene. 
 
 

ATTENTION!! 

If you switch off led controller when is functioning on automatic mode, the next time 

switched on it will start the program that it was executing before being switched off. 

 
 
Pressing the 

D

 button (AUTO) you enter the 

automatic mode. 

Pressing the 

E

 button (PROG) you enter the 

programming mode

.

 

 

 

 
 

5

 

Summary of Contents for DMX dedicated LED controller

Page 1: ...ORTANT TO READ CAREFULLY ALL THE INSTRUCTIONS IN THIS MANUAL QUALIFIED PERSONNEL ONLY IN COMPLIANCE WITH ALL THE SECURITY LAWS CAN DO THE INSTALLATION AND THE MAINTENANCE OF THIS CONTROLLER BEFORE CONNECTING THE PROJECTOR MAKE SURE THAT THE FREQUENCY AND THE VOLTAGE VALUES FOR ANY DOUBT CONTACT YOUR SUPPLIER OR SEND AN E MAIL TO tech lamposrl it The improper use of this controller cancel the guara...

Page 2: ...d G Green B Blue A Amber and ST Strobe of the group of lights used To modify the ongoing step assign a time different from 0 and with button C you can move from one value to the other of the labels from L1 to L6 When you are on a label use buttons A and B to modify the values and see what the projector does if it is connect to the led controller or you can check on zone 3 the values After these st...

Page 3: ...r changers LED Controller is a DMX console suitable for small applications and an easy to use but professional controller for our led s projectors LED Controller can control up to 6 groups of projectors via signal cable DMX 512 signal One group is made by one or more projectors For each group there are 8 dmx channels starting from channel 1 Group 1 from ch 1 to ch 8 Group 2 from ch 9 to ch 17 Grou...

Page 4: ... enter the automatic mode Pressing the E button PROG you enter the programming mode 4 Automatic mode The projectors connected to the led controller will execute the set program Fig 3 To choose a program press button A in Zone 2 under PROG is shown which of the 4 available programs is used In Zone 1 is shown the step and the time of execution The button B shows the performing mode used single scene...

Reviews:

No comments