© Lampert Werktechnik GmbH
2017
8
TOUCHSCREEN
(27) Select the material or welding program
(depending on the user level) by sliding to the left
or right within the selected user level. Press and
hold for 2 seconds to call the memory menu.
(28) Foot switch activated
(29) Smoothing mode activated
(30) Recommended setting range
(31) Output scale as a percentage (POWER in %)
(32) Preselect welding situation and pulse shape
(depending on user level)
(33) Red range: In this range the settings no longer
make sense and there is a possible risk of
damaging the workpiece.
(34) Pulse duration scale in milliseconds (TIME in ms)
5.2 EXPLANATION / OVERVIEW OF MENUS
(Fig. Schematic diagram of user levels)
ONCE IT IS SWITCHED ON, THE PUK D3 STARTS UP IN ITS START LEVEL (MAIN MENU).THE FOLLOWING USER
LEVELS CAN BE NAVIGATED AFTER PRESSING LONGER (> 1 SEC.) THE ROTARY CONTROLLER (25):
a)
Start level (main menu):
Preselection of the material to be welded and
preselection of the welding situation with display of the
recommended settings range for welding power and
pulse duration
b)
Expert level (if activated in the settings
)
Arbitrary preselection of the various welding curves
c) User programs and stored custom settings (if activated
in the settings)
d) Fixation welding (if activated in the settings)
e) Retention welding (if activated in the settings)
f) Settings (Language, gas valve, lighting …)
At the start level and in "Custom Programs", sliding in the
header bar on the display scrolls between the different
preset materials or stored programs depending on the
selected user level.
Beginners using the PUK system are advised to remain
within the start level.
PRESSING THE SELECTED MATERIAL (27) IN THE TOP OF THE DISPLAY FOR 2 SEC. CAUSES THE
PROGRAMMING MENU TO BE LAUNCHED:
28
27
31
30
34
32
33
29
Summary of Contents for PUK D3
Page 1: ...Operating manual PUKD3...
