2
Before installing base frame into the
Doorjamb, cheak that it is oriented
correctly. If the orientation is incorrect,
the door cannot be installed.
Caution
・
When adjusting the vertical position or the depth, loosen the
screws 360-degree, then hold the door at the suitable position and
re-tighten the screws. Use wedges to support the door.
(Tightening torque is 4.9 N·m.)
・
When adjusting horizontal position, turn Horizontal adjustment screw.
(There are two screws per hinge.)
The gap between Door and Frame will be expanded by turning the
screw clockwise.
Disassembly of Hinge
1
Hanging Door
3
Fastening Removable Screws
4
Installing Hinge to Door and Doorjamb
2
Base frame
Vertical adjustment (fastening) screw
Screw cover
Screw cover
Hinge body
Vertical adjustment
(fastening) screw
Loosen this screw
to disassemble
Horizontal
adjustment
screw
Horizontal
adjustment
screw
Backward
Forward
Up
Down
Right
Left
Vertical adjustment
screw
Depth
adjustment screw
Vertical adjustment
screw
Depth
adjustment screw
Door
frame
Door
Door
jamb
Door
INSTALLATION PROCEDURE
ADJUSTING DOOR POSITION
Do not remove the depth adjustment screw. The door may fall and
cause injury.
When adjusting the horizontal position, turn the two screws a little, by
the same amount. The hinge may be broken if you keep turning one
screw only.
Horizontal adjustment range is +3 mm/-2 mm. When turning the screw
to the right, if you move the part more than 2 mm, the cover cannot be
put on, since the part protrudes. If you still turn the screw, the door will
fall.
Caution
SUGATSUNE KOGYO CO.,LTD
Tokyo, JAPAN
Phone: +81 (0)3 3866 2260
E-mail:[email protected]
SUGATSUNE KOGYO (UK) LTD
Reading, UK
Phone: +44 118 9272 955
E-mail:[email protected]
SUGATSUNE EUROPE GmbH
Dusseldorf, GERMANY
Phone: +49 211 53812900
E-mail:[email protected]
SUGATSUNE SHANGHAI Co., LTD
Shanghai, CHINA
Phone: +86 21 3632 1858
E-mail:[email protected]
Guangzhou, CHINA
Phone: +86 20 6639 3552
E-mail:[email protected]
SUGATSUNE KOGYO INDIA PRIVATE LIMITED
Mumbai, INDIA
Phone: +91 22 28314490/91
E-mail:[email protected]
SUGATSUNE AMERICA, INC
California, USA
Phone: +1 310 329 6373
E-mail:[email protected]
Chicago, USA
Phone: +1 312 461 1081 E-mail:[email protected].
SUGATSUNE CANADA, INC.
Phone: +1 514 312 5267 E-mail:[email protected]
2019.09
1317-2
While holding the door,
insert Hinge main body
into the Base frame
on Doorframe. Keep
holding the door and fix
the hinge with the fixing
screws at once.
Vertical adjustment
(fastening) screw
The arrows should point in the direction of adjustment when the door is closed.
1 / 16 Arrenway Drive, Albany, Auckland. Ph 09 476 4008
www.uniquehardware.co.nz
1 / 16 Arrenway Drive, Albany, Auckland. Ph 09 476 4008
www.uniquehardware.co.nz