Safety
DISPLAY
A BETTER WORLD FOR ALL
第
6
页
1.4 Proper Use
Proper use of the display
• Do not expose any part of the display to any moist substances.
• Do not expose any part of the display to any abrasive substances.
• Do not expose any part of the display to any dust.
• Do not expose any part of the display to any corrosive substances.
• The display should be used in an environment that complies with the operating specifications.
• The display should not be used in environments containing airborne contaminants [for example,
contaminants produced by fog machines (cracked oil) or similar devices that deposit a thin layer of grease
on the LED indicator optics to reduce performance].
• The display should not be exposed to extreme heat or extreme cold conditions that exceed temperature
specifications.
• The display should not be exposed to any conditions or situations that would cause any part of the
display to become hot and not function properly. Such conditions include, but are not limited to, lasers,
ultrasonic vibrations, or any substances that prevent normal ventilation and heat dissipation of the display
panel.
• The display should not be exposed to the environment where moisture may condense or collect on
any component.
• The power supply connected to the display must comply with the specifications described in the
installation manual.
• When installing or disassembling the display, avoid any accidental collision at each corner of the
cabinet. Since the module's LED lamps are mounted near the edges of the LED boards, the corners of the
cabinet are highly susceptible to mechanical damage. Therefore, the cabinet must be handled with care at all
times.
• Do not place the cabinet or module on the surface of the LED lamp to prevent damage to the LED
lamp.
• When disassembling or installing a module, always ensure that the LED side of the module is parallel
to the LED side of the remaining adjacent modules, avoiding any mechanical stress on the corners of the
module.
• Do not apply an external force to the LED. Damage to the LED lamp due to mechanical stress is not
covered by the warranty.
• The security features and functional characteristics of the display cannot be compromised.
• It is not allowed to hang any other equipment on the back of the cabinet. It is not allowed to hang
