background image

1

FOLDING POCKET DOOR SYSTEM ALT-F 
Installation Manual

Thank you for selecting our product. Before starting installation, please read this manual thoroughly to 

ensure correct installation. Please keep this manual at hand for future reference.

WARNING:

 If these warnings are not followed, it may result in death or serious injury.

CAUTION:

 If these cautions are not followed, it may result in injury or damage.

It is necessary to manufacture the frame with sufficient strength so it endures the weight of the door and impact shocks upon 
opening/closing the door. Also make sure to only use the designated screws and to fasten them firmly. A frame with poor 
strength or loose screws might result in improper and slower movement of the door. In the worst case, the door might drop 
down and cause injury.

Do not try to use this product for any other purposes other than originally intended for. Do not use the parts for applications 
that are out of specification.

Do not disassemble nor modify any parts than those described in this document.

This (folding door system) should be installed by an experienced person who has correct knowledge. If the system is not 
installed correctly, the door will not operate smoothly, and or may cause injury.

This (folding door system) is a part for furniture fittings. After installation, make sure to test the finished product thoroughly to 
ensure that it is well-functioning and safe.

Make sure to follow the designated measurements, specifications, and horizontal/vertical angles. Make sure that the cabinet 
is not warped, since it may affect the movement of the door.

If cutting any parts, make sure to remove any burr before installation. Also check the upper rail for any left-over burr or scrap 
and remove these.

Make sure to check the screws for slack at regular intervals (one month from first usage, half year and then one time every 
year is recommended).

Prohibited

Warning
Caution

Required

Meaning of symbols

Pocket door hardware for folding

door system.

The folding door can be stored inside 
the shallow cabinet.

ABOUT THE PRODUCT

2 Rails Type

3 Rails Type

Max. door width

450 mm / door

Max. door height

1830 mm

1831 - 2400 mm

Door thickness

23 - 30 mm

Max. door weight

10 kg / door

SPECIFICATIONS

FOR YOUR SAFE WORK AND CORRECT INSTALLATION

Summary of Contents for ALT-F18LV2













Reviews: