10
l
Connect the water hose to the water
supply tap
(fig. 3)
only using the hose
supplied with the appliance (do not
reuse old hose-sets).
l
The washing machine should be installed
in its final position such that the water fill
hose
is not kinked or trapped
. The
corrugated drain hose should be inserted
into suitable drain pipe of between 50 cm
and 85 cm height above the floor using
the curved drain hose support. If an under
sink connection is used the drain hose
must be routed above the sink overfill
opening to prevent back siphoning. Care
must be taken to
avoid kinking or
trapping the drain hose
(fig. 4)
.
l
Make final adjustments to feet if
necessary to align frontals as illustrated in
figure 5
:
a
. turn the nut clockwise to release the
screw;
b
. rotate the foot to raise or lower it until it
touches to the floor;
c
. lock the foot, screwing in the nut, until it
tightens against to the bottom of the
washing machine.
l
Plug in the appliance.
3
min 50 cm
max 85 cm
2,5 mt
max
max 100 cm
min 4 cm
4
*
ACCESSORY SOLD SEPARATELY
A
B
C
5
Hydraulic connections
Setting
WARNING:
contact the Customer Service Centre
should
the
power
cord
need
replacement.
Installation faults are not covered by
the manufacturers warranty.
