Lamona LAM8775, User'S Manual & Instructions, Page: 17 / 28

EN
17
l
When START/PAUSE is pressed on the
machine with the door closed, the indicator
will flash momentarily and then illuminate.
l
Wait until the DOOR LOCKED light has
gone out before opening the door.
2) SPIN SPEED
Shows the selected spin speed. May be
changed using the spin selection button.
3) WASH TEMPERATURE INDICATOR
LIGHTS
Shows the wash temperature of the
selected programme. May be changed
using the Temp. option button.
4) CYCLE DURATION
l
When a programme is selected the display
automatically shows the cycle duration,
which can vary, depending on the options
selected.
l
Once the programme has started you will
be kept informed constantly of the time
remaining to the end of the wash.
l
The appliance calculates the time to the
end of the selected programme based upon
a standard loading, during the cycle, the
appliance corrects the time to that
applicable to the size and composition of
the load.
5) STAIN LEVEL INDICATORS LIGHTS
l
Once the programme has been selected,
the indicator light will automatically show
the stain level set for that programme.
l
Selecting a different stain level the
relevant indicator will light up.
6) OPTIONS INDICATOR LIGHTS
The indicator lights show the option that
can be selected by the relevant button.
7) KEY LOCK INDICATOR LIGHT
The indicator light show that the keys
are locked.
8) Kg MODE (function active only on
certain programmes)
l
During the first minutes of the cycle, the
"Kg MODE" indicator remain on while the
intelligent sensor will weigh the laundry
and adjust the cycle time, water and
electricity consumption accordingly.
l
Through every wash phase "Kg MODE"
allows to monitor information on the wash
load in the drum and in the first minutes
of the wash it:
- adjusts the amount of water required;
- determines the length of the wash cycle;
- controls rinsing according to the type of
fabric selected to be washed it;
- adjusts the rhythm of drum rotation for
the type of fabric being washed;
- recognizes the presence of lather,
increasing, if necessary, the amount of
water during rinsing;
- adjusts the spin speed according to the
load, thus avoiding any imbalance.
Close the door BEFORE selecting the
START/PAUSE button.
If the door is not closed properly the
light will flash for approx. 7 seconds,
after which the machine will not
commence the cycle.
Re-open and close the door, press
START/PAUSE to start cycle.