Lamona Lam8303 Installation Instructions Manual Download Page 2

2

www.howdens.com

Risk of damage to 

appliance:

Do not attempt to 

 

move the appliance 

 

by the door.

NOTE:

 Do not leave the 

dishwasher door open. 

Be careful not to trip 

over open door.

Warning:

Be aware of the 

instability of the 

appliance prior to being 

fitted into position.

Risk of damage to 

property:

Take care of surrounding 

area when moving the 

appliance to prevent 

damage to flooring, wall 

coverings, pipes etc..

Two person lift.

Risk of injury:  

 

Beware of sharp metal 

edges. Use gloves when 

handling.

NOTE:

 If the electricity 

cable is damaged it 

must be replaced by a 

 

competent person.

Washing machine 

 

must be fixed securely 

and level.

Ensure that all packing 

and transit protectors 

have been removed 

from the appliance 

before positioning.

This appliance is not 

 

designed for stacking 

with other appliances.

Installation

Safety Information

Fitting guide

1.

  Dimensions ......................................................p.4

2.

  Dishwasher connections. ...................................p.4

3.

  Fit feet and raise 10mm below 

 

 

worktop height .....................................................p.6

4.

  Locate securing brackets ...................................p.6

5.

  Protection strip for timber worktops ..................p.7

6.

  Positioning the dishwasher .................................p.7

7.

  Adjust feet and raise dishwasher to  

 

underside of worktop (level) ...............................p.8

8.

  Remove ‘H’ frame ................................................p.8

9.

  Standard décor door preparation ......................p.9

10.

 Décor drawer frontals preparation ....................p.9

11.

  Fit décor door / décor drawer frontals

 ..............p.10

12.

 Final adjustment and secure dishwasher .........p.11

13.

 Fit plinth ................................................................p.12

14.

 Switch on water and electric

 ..............................p.12

Summary of Contents for Lam8303













Reviews: