_ 11
User manual LAM6911
TROUBLESHOOTING GUIDE
Symptoms
Possible Cause
Solutions
No cooling
•
Plug not put in correctly
Ensure the plug is in and the socket is switched on
•
Low voltage
Ensure normal voltage
•
Fuse blown
Replace the fuse with the recommended AMP rating
Temperature inside is not
cold enough
•
The Drinks Cooler is placed too close to
a heat source
Keep the Drinks Cooler away from sunshine or other heat
sources .
•
Bad ventilation
Place the Drinks Cooler in an area with good ventilation
and keep objects away from the fans
•
The door is not closed tightly, or opened
too frequently or for too long
Close the door tightly and do not open the door too
frequently or for too long.
Strange smell inside the
Drinks Cooler
•
Check contents for anything sour or
perishable.
Remove any perishable items and clean thoroughly.
Display light flashes
•
The set temperature is higher than the
inner temperature of the Drinks Cooler
Adjust the temperature accordingly
•
The Drinks Cooler is defrosting
This is a normal automatic function, and no repair is
needed
Frost is forming on the
cooling surface
•
There may be too much humidity or the
temperature is too low inside the case.
Disconnect the power to the Drinks Cooler and defrost
manually, reconnect the power once the frost has thawed.
The Drinks Cooler seems to
make noises
•
Noises may come from the working of
the compressor or refrigerant, which
is normal.
Some noises are normal and no cause for concern
however you may wish to try the following:
•
Check to assure that the appliance is level and not
touching the surrounding cabinetry.
•
Ensure no parts within the product are lose.
•
As each cycle ends, you may hear
gurgling sounds caused by the flow of
refrigerant.
•
Contraction and expansion of the inside
walls may cause popping and crackling
noises.
The door will not close
properly.
•
The drinks cooler is not level
Adjust the products feet to ensure the product is level
•
The door gasket may dirty.
Clean the door gasket with warm water
•
The shelves or bottles may be
misaligned
•
Re-adjust the shelves
The display window is shown
with “HH” or “LL” instead
of a digital figure, and/or
with continuous ‘beep/buzz’
sound.
•
The temperature probe is out of order.
Consult your authorized service agent
.
If you cannot eliminate the problem after following the instructions in this section, consult your depot
or the authorized service agent. Never try to repair a nonfunctional product yourself.
07 - Troubleshooting
Troubleshooting
