Problem
Possible cause
Remedy
The display does not show
the time during the off status.
The display is deactivated.
Touch
and at the same
time to activate the display
again.
It takes too long to cook the
dishes or they cook too quick-
ly.
The temperature is too low or
too high.
Adjust the temperature if nec-
essary. Follow the advice in
the user manual.
Steam and condensation set-
tle on the food and in the cav-
ity of the oven.
You left the dish in the oven
for too long.
Do not leave the dishes in the
oven for longer than 15 - 20
minutes after the cooking
process ends.
The display shows "C3".
The cleaning function does
not operate. You did not fully
close the door, or the door
lock is defective.
Fully close the door.
The display shows an error
code that is not in this table.
There is an electrical fault.
• Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it again.
• If the display shows the
error code again, contact
the Customer Care De-
partment.
Service data
If you cannot find a solution to the problem yourself, contact your dealer or an Authorised
Service Centre.
The necessary data for the service centre is on the rating plate. The rating plate is on the
front frame of the appliance cavity. Do not remove the rating plate from the appliance
cavity.
We recommend that you write the data here:
Model (MOD.)
.........................................
Product number (PNC)
.........................................
Serial number (S.N.)
.........................................
Electrical installation
The manufacturer is not responsible if you do not follow the safety precautions
from the Safety chapters.
This appliance is supplied only with a mains cable.
Applicable type of cable:
34
