Exclusive to Howdens Joinery.co
Page _ 10
The Carbon Filter (not supplied)
If the appliance is going to be used in recirculation
mode then it is necessary to
n
o
b
r
a
c
a
This will help to absorb odours caused by cooking.
Carbon
have a limited life. We advise you
to change them when there is a noticeable drop
in performance. The intervals between changing
the
will depend entirely upon the amount of
cooking you do, but on average they will last about
6 months.
•
To gain access to the carbon
of all
remove the grease
.
e
v
o
b
a
s
a
•
Remove the old
and install new charcoal
by
first removing the flexible wire
retainers. Then remove the old carbon filter
and replace with a new one, this should be
placed above the grease filter. Finally replace
the wire retainers and refit the assembly.
Replacing the Lamps
Fittings
The extractor hood is
p
m
a
l
h
ti
w
s that may
need to be replaced periodically.
To do this, ensure that the power is switched off and
the lamp has had time to cool.
•
Remove the grease
to gain access.
•
Unscrew the lamp and replace with new
lamp of the same type and wattage.
Lamp replacement is not covered by your
guarantee
The lamps on this appliance should only be used
during operation of the cooker hood. They should
not be left on permanently and used as a main
lighting source. The extractor is for domestic use
only.
.
User manual LAM2203
Grease filter: HJA2913
4.7mm x 37mm
x4
x4
x4
x1
x1
x3
x2
4.2mm x 16mm
4.7mm x 9mm
Carbon filter: HJA2914
Lamp: 28W Eco-Halogen SES