Lamona HJA8901 Installation Instructions Manual Download Page 2

2

www.howdens.com

Safety Information

Two person lift.

Risk of injury:   

Beware of sharp metal 

edges. Use gloves when 

handling.

NOTE:

 If the electricity 

cable is damaged it 

must be replaced by a  

competent person.

Washing machine must 

be fixed securely and 

level.

Risk of damage to 

property:  

Take care of surrounding 

area when moving the 

appliance to prevent 

damage to flooring, wall 

coverings, pipes etc..

Ensure that all packing 

and transit protectors 

have been removed 

from the appliance 

before positioning.

DO NOT PUSH

  

against the washing 

machine fascia panel.

This appliance is not  

designed for stacking 

with other appliances.

Warning for serious 
injury or death risk.

Warning for injury or 
property damage risk.

Important / note for 
operating the system 
correctly.

Warning for electric shock.

Warning for risk of 
fire / flammable materials.

Throughout this manual the following symbols are used.

DO NOT KINK HOSES 

BEHIND MACHINE!

Machine will not work properly.

12921 LAM8720_40 WM_INSTALLATION.indd   2

12921 LAM8720_40 WM_INSTALLATION.indd   2

04/11/2020   11:18:20

04/11/2020   11:18:20

Summary of Contents for HJA8901













Reviews: