Page
7
www.howdens.com
•
From inside the hood, fit the two remaining securing screws B into the holes previously drilled.
•
Using the assembly drawing, screws and washers provided, carefully attach the glass canopy to the
extractor body.
•
Connect the ducting connector to the top of the hood.
EXTRACTION VIA DUCTING
Never use the hood in areas where devices with exhaust pipes connected to the outside are already
operating unless perfect ventilation can be guaranteed.
•
Connect the external ducting kit to the outlet of the extractor.
EXTRACTION VIA RECIRCULATION
Connect the recirculation deflector to the chimney section
Attach 2 charcoal filters to the sides of the motor inside the hood. Note: These are not required if the
extractor is to be ducted out.
