21
12)
Using a 6 mm drill bit, drill out two holes on the pencil markings
that you made in step 11. Insert rawl plugs into the holes and then
use a screwdriver to secure the fixing bracket to the wall.
o
Refit chimney section
(C)
to the extractor and fix it using the
two screws that are supplied.
o
Secure the top of chimney section
(C)
to the flat bracket, using
the screws provided.
o
Slide chimney section
(D)
inside of chimney section
(C)
. Then
secure the L shaped bracket to the wall, using the same method
as you have just used to secure the lower bracket.
13)
Lift chimney section
(D)
up to the ceiling and secure it to the L
shaped bracket using the screws provided.
Summary of Contents for HJA2480
