Lamona HJA2339, User'S Installation Manual

Page: 11 / 16

11 • Installation
Mounting the Extractor
• Cut a rectangular aperture in the
canopy unit 475mm wide X
285mm a minimum of 50mm
from the rear wall and from the
front of the canopy.
• If the extractor is to be ducted
out, ensure that it is possible to
connect the ducting hose.
• If the extractor is to be used in
recirculation mode, ensure that
the canopy allows the
recirculating air to be circulated
from the top of the extractor and
canopy.
• Remove the grease filter ‘A’ as
described on page 7.
• Remove the four screws securing the extractor frame ‘B’ to the extractor
body.
• If the extractor is to be ducted out, connect the extractor to the vent hose.
• With the help of an assistant introduce the extractor into the opening cut
into the canopy housing, taking care not to trap the ducting hose or the
mains cable, and secure with the wood screws provided.
• Replace the extractor frame and the four screws removed earlier from the
extractor.
B
A