10
Enable External Term.
This command can be used to
remotely manage the call of a
mechanical chronothermostat
installed in the house.
If this chronothermostat is set to
a desired temperature (e.g. 22°c),
you can manage virtual ON-OFF
via the app, thus allowing you to
start heating the house as
desired.
Use the
Chronothermostat to
switch the boiler
completely on and off.
ATTENTION
If the boiler is switched OFF,
the internal accumulation
tank will cool down.
Enable External Term.
This command can be used to
remotely control the general
ON-OFF of the home heating
system in combination with
SET
Room Temp.
Room Temp.
This command can be used to
remotely manage the room
temperature read by the remote
console located in the house.
If you leave the
Enable External
Term.
set to
ON
, raising or
lowering the temperature will
cause the home heating to start.
Chronothermostats
3
and
4
switch the boiler
completely on and off.
ATTENTION
If the boiler is switched OFF,
the internal accumulation
tank will cool down.
Chronothermostats
1
and
2
can be used to program the
start of heating in the home
at a specific time. In fact,
these two
chronothermostats activate
the internal pump and do
not activate complete shut-
down of the boiler, allowing
the accumulation tank to
remain warm for any
sanitary requirements.
APP functions in combination with the
TERMOBOILER
boiler
APP functions in combination with the
TERMOBOILER
boiler and the
REMOTE CONSOLE
