LAMINOX FSH HP KING 12DC32, User Manual

Page: 31 / 47

- 31-
P29 Coil temperature to active defrost -8~5
℃
0 0 0 0
P30 Coil temperature to stop defrost 5~30
℃
20 20 20 20
P31 The max defrost time 2~20min 15 15 15 15
P32 EEV control mode
0-no 1-Checking table 2-manual 3-
suction superheat 4-Discharge superheat
4 4 4 4
P33 EEV manually initial open steps (heating) 50~480(Only valid when P32=2) 400 400 400 400
P34 EEV manually initial open steps (cooling) 50~480(Only valid when P32=2) 400 400 400 400
P35
In DHW mode, highest water temperature for
compressor running
0~60
℃
55 55 55 55
P36
Time interval between compressor and E1
startup (reserved)
0~999min 0 0 0 0
P37
Temperature difference for adjustable DC fan
speed (heating)
2~15
℃
6 6 6 6
P38
Temperature difference for adjustable DC fan
speed (cooling)
3~18
℃
8 8 8 8
P39 Choose compressor model (reserved) 0~999 258 258 258 258
P40 Compressor frequency setting 0- Manual 1-Auto 1 1 1 1
P41 Compressor oil return frequency 10~100 Hz ( When P40=0 ) 50 50 50 50
P42 Compressor frequency limiting current 1~50A 0 0 0 0
P43 Compressor frequency reduction current 1~50A 0 0 0 0
P44 Compressor shutdown current 1~50A 0 0 0 0
P45 Maximum running frequency 50~120 Hz 70 85 85 70
P46 Minimum running frequency 0~90 Hz 25 25 25 25
P47 Defrost running frequency 30~90 Hz 65 65 65 65
P48 DHW maximum frequency 2~10 (Max frequency X 20~100%) 10 10 10 10
P49 Discharge superheat percentage coefficient 0~99 (display value multiply 0.1) 2 2 2 2
P50 Discharge superheat differential coefficient 0~99 1 1 1 1
P51
High pressure value to limit compressor
frequency rising
2.0~4.5MPa (display value multiply 0.1) 43 43 43 43
P52
High pressure value to cancel compressor
frequency limit
2.0~4.5MPa (display value multiply 0.1) 39 39 39 39
P53 Protection pressure (High) 2.5~5.0MPa (display value multiply 0.1) 45 45 45 45
P54 Protection pressure (Low) 0.01~1.0MPa (display value multiply 0.01) 10 10 10 10
P55
High pressure protection recovery pressure
difference
0.2~1.5MPa (display value multiply 0.1) 5 5 5 5
P56
Low pressure protection recovery Pressure
difference
0.01~1.0MPa (display value multiply 0.01) 15 15 15 15
P57 Discharge protection temperature 110~125
℃
115 115 115 115
P58
Temperature differential for Adjustable water
pump 1 speed
3~8
℃
5 5 5 5
P59 PWM water pump minimum running speed 2~8 (stands for 20% to 80% of the speed) 8 8 8 8
P60 DC motor maximum running speed 500-1500RPM ( display value multiply 10) 70 85 90 85
P61 minimum water flow 3~80L/min, Step 1 14 16 18 22
P62 Definition of A/C function
0-C heating 1-Only cooling 2-Only
Heating
0 0 0 0
P63 DHW validation 0
–No 1- Yes.
1 1 1 1
P64 EEV minimum open step 0-480 70 70 70 70
P65 Function definition for water pump C2
0-Auxiliary pump, 1- Indoor circulating
pump
0 0 0 0
P66 Selected heat source
0- Air source.
1- Water source
（
Reserved
）
0 0 0 0
P67 Room thermostat (reserved) 0- OFF , 1- ON 0 0 0 0
P68 Flow switch selection 0-Water flow switch, 1-Water flow sensor 1 1 1 1
P69 Fan motor type
0-AC motor 1-First DC motor 2-
Second DC motor. 3-Two DC motor
1 1 1 3
P70 Auto restart 0-OFF, 1-ON 1 1 1 1
P71 DC motor speed control 0- Manual, 1- Auto 1 1 1 1
P72 DC motor fixed speed 0-1500rpm (display value multiply 10) 0 0 0 0
P73 Pressure controller type 0-Pressure sensor 1-Pressure switch 0 0 0 0
P74 EVI EEV control mode 0-no 1-checking 2- manual 3-auto 3 3 3 3
P75 EVI EEV manually initial open steps(heating) 40~480 40 40 40 40