![background image](http://html.mh-extra.com/html/lami/daisy-55ec/daisy-55ec_instruction-manual_671622014.webp)
Only cut the release paper on the laminate film and rotate the laminate roller until the cross section of the release
paper cut touches the re- winding paper tube.
Here, hold the release paper so that it does not get entangled.
When the release paper touches the re-winding paper tube, attach it using cellophane tape to finish installation.
4
Use the winding device.
If the optional re-winding device is used, install the device according to the following sequence.
Attach the laminated product to the re-winding paper tube using tape. The motor starts rotating and winding
once the re-winding device switch is turned ON.
The re-winding device switch can be controlled to forward or reverse rotation.
When the switch is turned to
ఘ
direction, the re-winding device rotates in direction
ձ
.
When the switch is turned to
direction, the re-winding device stops rotation.
When the switch is turned to
direction, the re-winding device rotates in direction
ղ
.
%CWVKQP
l
The re-winding device (optional) can be winded up to 50 m (about 30 kg).
Standard for the product of our company:
Ÿ
Under-film
PET
12
!
1400 mm
ഀ
Ÿ
Laminate film
PVC
80
!
1350 mm
ഀ
Ÿ
Media
PVC
80
!
1370 mm
ഀ
During cold processing, winding is about 30 kg at 50 m.
Under-film
Laminate film
Release
paper
re-winding
paper tube.
Release paper