background image

 

8.2. FCC Information and Copyright 

 
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant 
to part 15 of the FCC Rules.  
 
These limits are designed to provide reasonable protection against harmful interference in a residential 
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed 
and used in accordance with the instructions, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a particular installation. If this 
equipment does cause harmful interference to radio or television reception, which can be determined by 
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more 
of the following measures:  
 

● Reorient or relocate the receiving antenna.  
● Increase the separation between the equipment and receiver.  
● Connect the equipment into an outlet on a circuit different from that to which the receiver is 

connected.  

● Consult the dealer or an experienced radio/TV technician for help.  

 
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:  

1) This device may not cause harmful interference, and  
2) This device must accept any interference received, including interference that may cause 

undesired operation.  

 
Changes or modifications not expressly approved by the party responsible for compliance could  void the 
user's authority to operate the equipment.  
 

8.3. FCC RF warning statement 

 
The device has been evaluated to meet general RF exposure requirement. The device can be used in 
portable exposure condition without restriction. 
 
 

8.4. WEEE Information 

 

For EU (European Union) member users:  
 
According to the WEEE (Waste electrical and electronic equipment) Directive, do not dispose of this 
product as household waste or commercial waste.  

 
This symbol on the product or on its packaging indicates that this product must not be 
disposed of with your other household waste. Instead, the device should be taken to 
the waste collection centers for activation of the treatment, collection, recycling and 

80 

Summary of Contents for Time



















































































Reviews: