24
GB
• Operating instructions
Once the burner is installed and correctly adjusted, its operation is fully automatic without requiring any
control by the user. In case of anomalies or no fuel, the burner stops and shuts down. It is advisable to
fill with before it completely finishes, to avoid irregular burner operation.
Make sure the room where the burner is installed is free of flammable materials or objects, corrosive
gases and volatile substances, and that it is not dusty. In fact, dust drawn by the fan sticks to the blades
and reduces the air flow or can obstruct the flame stability disk, affecting its efficiency.
Do not allow unskilled persons children to tamper with the burner.
Max. power adjustment (parameter u02) depending on the boiler
The parameter t18 is set by default at the value 0 (on-off operation).
It is necessary to set the maximum power of the burner as a function of the boiler’s power (see table
3).
Table 3
• General instructions
This unit must only be used for its inteded purpose. This unit can be used with heat generators for solid
fuels, compatibility with its caracteristics, performance and heating capacity. Any other use is deemed
improper and therefore hazarddous.
Opening or tampering with the unit’s components is not allowed (except for the parts requiring servi
-
cing); do not modify the unit to alter its performance or intended use.
If the burner is completed with optionals, or accessories, only use original products.
BURNER INSTALLATION AND SETTING MUST ONLY BE CARRIED OUT BY QUALIFIED AND SPE
-
CIALISED PERSONNEL, COMPLYING WITH ALL THE INSTRUCTIONS GIVEN IN THIS TECHINAL
MANUAL, THE CURRENT PROVIONS OF LAW, THE PRESCRIPTIONS OF NATIONAL AND LOCAL
STANDARDS, AND THE RULES OF PROPER WORKMANSHIP.
INSTALLATION
Power
3.4 P (kW)
5.5 P (kW)
1
14
30
2
20
36
3
25
41
4
30
48
5
34
55
