LAMBERTI ELEKTRONIK LATHERM SOL BASIS, Operating Manual, Page: 7 / 12

Page 7
8.4. Leaving a submenu
From anywhere in a submenu, you can return to the main menu without saving changes by pressing .
In addition, the start display is returned to automatically if 60 seconds pass without any button being pressed
(exception: relay test submenu returns to main menu after 30 minutes).
9. Functions and settings
The following menus can be called up from the start display with the buttons and :
1. Information display “INF”
2. User settings “AE”
3. Manual relay adjustment “REL”
9.1. Information display submenu “INF”
In the information display submenu, you can read the values specified below. Press the button while in
the start display. “INF” appears. Confirm your selection by pressing . As long as you are in the
information display submenu, an “i” also appears in the display.
Note!
Depending on the design and configuration of your solar energy system, it may happen that not all of
the values listed below are displayed.
!
In the information display submenu, the temperature values for the collector arrays and storage reservoirs are
shown first:
Temperature of collector array (TC)
SP Storage reservoir temperature in upper part of storage reservoir (TSP)
SP Storage reservoir temperature in lower part of storage reservoir (TSR)
Basic menu navigation
esc
+
–
+
OK