manualshive.com logo in svg

lamber 015-ek-plus, Instruction Manual

Share
Download
lamber 015-ek-plus Instruction Manual Download Page 6

6 

 

 

 
 
 
 

 

GENERAL NORMS 

ENGLISH 

 

Thank You for purchasing our Dishwashing Machine. 
 
Perfect washing-up results as far as hygiene concerns and a correct operation of the dishwashing machine 
can be assured only in case the instructions reported in the present manual are carefully followed. 
We hope the information reported in the present manual will be helpful to You. 
They are based on data and on our best updated knowledge. 
Carefully read the Instructions reported in the manual, recommendations and suggestions included. 
Carefully read the terms of sale too, even the ones limiting warranty. 
 
 

This appliance in not intended for use by persons (including children) with reduced physical, sensory or 
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or 
instruction concerning use of the appliance by a person responsible for their safety. 
Children should be supervised to ensure that they do not play with the appliance (EN 60335-2-102/7.12). 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for 015-ek-plus












































Reviews:

No comments

Brands by name

Popular brands

Load more brands