Lambda Labs - Professional Acoustics TX-1A Manual
2.3.
Maintenance
In order to keep the EPS rigging points in a good condition and deep black colour, follow the description below from time to
time or after long and intense use. Repeat these steps more often when installed in a salty environment like sea shores:
• Clean and protect the EPS rigging
points with WD 40 and/or Rolimeco 1.
For salty environments, Rolimeco 5. is
recommended.
Do
not
use
ANY
other
cleaning
supplies
on
these
areas!
• We advice against the use of pressure
water cleaning the Lambda Labs
Loudspeakers and rigging parts in
general!
High
pressure
cleaning
is
at
your
own
risk!
!
23
I-Bracket
S:
Wall mount
(I-Bracket L not shown)
Note:
The maximum possible
tilt angle for the TX-1A
loudspeaker in combination
with the
I-Bracket
S
or
L
depends on the angle of the
loudspeaker to the wall and
the position of the Universal
Plate. In general, the more
parallel the loudspeaker is to
the wall, the larger the max.
tilt angle becomes.
For further details, refer to
the I-Bracket manual!
R
Smaller possible max. tilt angle
before touching the wall with the
lower back of the speaker
Greater possible max. tilt angle
before touching the wall with the
lower back of the speaker
Universal Plate
Upside down mounting
