Lambda Labs CX-3A, Manual

Page: 11 / 25

Lambda Labs - Professional Acoustics CX-3A Manual
2.2 Figure 2: CX-3A Back & Bottom Side
www.lambda-labs.com ! 10
e)
f)
g)
g)
h)
PART DESCRIPTION of 2.2 Figure 2 REFERENCE
e) Amplifier Module
The built in bi-amp module delivers 800W plus 200W RMS power. It comes with
4 ready to use presets to match the various loudspeaker setups and the use of
further products like additional subwoofers.
Chapter 2.2.1
f)
Second Independent Safety Link
By removing the dummy screw, an M10 ring eye can be inserted to safe the
loudspeaker from accidently falling with a second independend safety link.
Chapter
2.2.3
g)
Rubber Feets
8 rubber feets, attached to the loudspeaker`s bottom and monitor side, make
the loudspeaker stand safely in both vertical and horizontal position.
_
h) Adjustable Speaker Flange
The loudspeaker can be tilted down- or upwards by adjusting the angle in 4.5°
steps. The maximum possible tilt angle is +/- 13,5°. The stand adapter is
suitable to use with a stand/distance rod tube diameter of 35mm. Lambda Labs
recommends the use of products with the „Ring Lock“ system.
Chapter 2.2.2